Why You Should Choose Our Premium Wash and Protect Service: The Ultimate Car Detailing Decontamination Wash for Your Vehicle

At Grant Auto Detailing, we know that a clean car is not just about appearance—it’s about protecting your investment and maintaining its value. Our Premium Wash and Protect service is a comprehensive decontamination process designed to thoroughly cleanse your vehicle, remove harmful contaminants, and leave it with a protective layer that enhances its gloss and shine.

Let’s walk you through each step of this advanced wash process and how it works to give your vehicle the care it deserves.

1. Alkaline Snow Foam Pre-Wash

The first step in the Premium Wash and Protect is the alkaline snow foam pre-wash. This foaming solution is specially formulated to break down and lift away surface dirt, grime, and road contaminants before the contact wash. The alkaline solution works by gently softening and emulsifying the dirt, making it easier to remove without the risk of scratching or marring the paint. After the foam has done its job, we rinse the vehicle thoroughly with a pressure washer to remove the majority of the dirt and grime, preparing it for the following steps.

2. The Wash Process

Next, we use a rinse-less wash solution to clean the car. The rinse-less wash solution is applied directly to the vehicle’s surface using a pump sprayer. The solution then emulsifies and encapsulates the dirt and grime, making for a much safer wash process than traditional shampoos. Then, using multiple clean microfiber towels, we gently wash and clean the surface.

3. Iron and Fallout Removal The first Step in The Car Detailing Decontamination Wash

Once the surface dirt has been removed, the next step targets hidden contaminants that are embedded in your car’s paint: iron particles and industrial fallout. These microscopic particles, often from brake dust or pollution, can bond to your vehicle’s surface and cause long-term damage like rust and paint deterioration.

We apply a specialized iron and fallout remover that reacts with these particles, dissolving them and turning purple as the contaminants lift off the surface. This process ensures that your car is free from harmful iron deposits and helps restore its smoothness

.

4. Tar, Tree Sap, and Adhesive Removal

Road tar, tree sap, and adhesives are some of the most persistent contaminants that adhere to your vehicle’s paint. These substances can be tricky to remove and often require specific products designed to break them down safely.

Our tar, tree sap, and adhesive removal process uses specialized cleaners that dissolve these sticky substances without damaging the paint. Whether your car has road tar stuck to the lower panels or tree sap from overhanging branches, we carefully treat these areas to remove all traces of these stubborn contaminants, ensuring your vehicle is spotless from top to bottom.

5. Claying Process to Remove Any Remaining Contaminants

Even after dealing with iron fallout, tar, and sap, there may still be small particles and pollutants that are embedded deep in the surface. To address this, we use a synthetic clay towel to gently decontaminate your vehicle’s paint. The synthetic material is safe and highly effective at removing the remaining impurities. This process leaves your paintwork ready for the final step of protection, ensuring there is nothing left on the surface to interfere with the application of a wax or sealant.

6. Application of a Spray Wax

The final step in the Premium Wash and Protect service is the application of a high-quality spray wax. This wax adds a protective layer providing several benefits to your vehicle:

• Enhanced Protection: The spray wax creates a hydrophobic barrier on the paint, helping to repel water, dirt, and road contaminants.

• Increased Durability: Providing long-lasting protection against UV rays, bird droppings, and other environmental pollutants.

• Improved Shine: The wax enhances the depth and gloss of your vehicle’s paint, leaving it with a showroom-quality finish that turns heads.

• Easy Maintenance: With the hydrophobic properties of the spray wax, water beads off the surface, making it easier to clean and reducing the need for frequent washing.

Conclusion

Our Premium Wash and Protect service at Grant Auto Detailing is the ultimate way to give your vehicle the comprehensive cleaning and protection it deserves. From the initial snow foam pre-wash to the final application of spray wax, each step in this process is designed to remove contaminants, protect your paint, and enhance your vehicle’s appearance.

By investing in our Premium Wash and Protect service, you're not just giving your car a deep clean—you're protecting it from the elements and ensuring it maintains its shine and value for years to come. Its recommended to give your vehicle a decontamination wash every 3 to 6 months but this may vary depending on your environment and how often the vehicle is used.

Contact us today to schedule your Premium Wash and Protect and experience the difference of a professional car detailing decontamination wash.